Categories
All Related Products
Ropes and Cordages (30)
Personal Protective Equipment (82)
Tape (12)
Tarps (2)
Stretch Film (1)
Twine (6)
Strapping / Seals / Tools (8)
Sorbents (3)
Buckets and Lids (2)
Safety Fencing and Netting (2)
Tie Wire (2)
Nails (4)
Rubber Bands (4)
Fabrication Products (1)
Palmer Safety (166)
BeamGuard HLL Stanchion
Part Number: BEAMG
The Palmer Safety BeamGuard HLL Stanchion can be used in combination with any of Palmer Safety’s rope HLL kits and cable HLL kits. Able to accommodate up to two workers between each set of stanchions (maximum stanchion spacing is 60’), the BeamGuard has three base size options to allow for installation onto a variety of beam sizes. A Pass-Through Top...
C-Slab Grabber
Part Number: GUARDRAILSLAB
The Palmer Safety C-Slab Grabber is the perfect solution for installing guardrail systems on concrete decking. This specially designed guardrail system includes an anti-slip grip, a quick adjust handle, and a back-up safety pin that functions to ensure complete system integrity, all of which serve to meet or exceed compliance with all applicable OSHA regulations. The C-Slab Grabber is fast...
Guardrail System
Part Number: GUARDRAIL
Guardrail System may be used in Fall Prevention applications ONLY. Fall Prevention Systems are placed around the leading edges of any and all fall hazards to prevent a worker from going over an edge, and may be used in substitute of Fall Protection or safety netting systems. Installation requirements for Guardrail System set forth in product instruction manual MUST be...
Parapet Clamp Guardrail System
Part Number: GUARDRAILPARAPET
The Palmer Safety Parapet Clamp Guardrail is an economical and easy to use system. An often overlooked option in the world of fall protection, guardrails and warning lines function to block workers from exposure to fall hazards, often entirely eliminating the need for other types of fall protection equipment. Each clamp is provided with a corresponding guardrail post, which is...
Polyurethane Palm Impact Glove A5
Part Number: G4502
Our polyurethane palm impact level 2 cut level A5 glove with breathable coating is designed to keep hands protected with outstanding wet/dry grip. Common uses include electronics, glass cutting, sheet metal handling, and general assembly.
Premium Palmer Rescue Kit
Part Number: RRDS
5 to 1 Rescue Kit complete with 150 feet of rope included. With a heavy duty waterproof bag for storage. The kit includes an integral braking system in case of accidental release of rope by rescuer.
Standard Palmer Rescue Kit
Part Number: RRDS1
4 to 1 Rescue Kit complete with 150 feet of rope included. With a heavy duty waterproof bag for storage.
3-Ply Disposable Face Mask
Part Number: FM3PLY
Our standard 3-Ply Disposable Face Mask is a comfortable fit, offers perspiration absorption, and reduces fog to eye wear. Manufactured with micro fine filter media that protects against respirable suspended particulate matter, dust, fluids, germs, and weather. Applications may include traveling through congested airports, bus terminals, malls, parks, offices, grocery stores, and busy city streets.
Dual SRL LE 9’ Galvanized Cable with Aluminum Rebar Hook and SRL170 Connector
Part Number: SRL1411242TDual SRL LE 9’ Galvanized Cable with Aluminum Rebar Hook and SRL170 Connector
Part Number: SRL1411242T
SRD 9’ Leading Edge Twin Galvanized Cable with Aluminum Rebar hook, 9’ retractable galvanized cable, swivel top composite housing, 2-1/2” aluminum rebar hook, 1/2” carabiner included. Black housing. Meets or exceeds ANSI/ASSE Z359.14-2014 Class B SRL-LE.
Dual SRL LE 9’ Galvanized Cable with Small Hook and SRL170 Connector
Part Number: SRL1411212TDual SRL LE 9’ Galvanized Cable with Small Hook and SRL170 Connector
Part Number: SRL1411212T
SRD 9’ Leading Edge Twin Galvanized Cable with Small hook, 9’ retractable galvanized cable, swivel top composite housing, 3/4” load indicator hook, 1/2” carabiner included. Black housing. Meets or exceeds ANSI/ASSE Z359.14-2014 Class B SRL-LE.