All Related Products
12” Roof Anchor Back Plate
Part Number: ANCHOR12BACKER
Back Plate for 12” Roof Anchor 1/2” Thick. For Mounting 12” Roof Anchor to Beams or Other Structural Member.
12” Roof Anchor Post
Part Number: ANCHOR12POST
12” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
12” Roof Anchor w/Baseplate
Part Number: ANCHOR12PLATE
12” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
18” or 24” Roof Anchor Back Plate
Part Number: ANCHOR24BACKER
Back Plate for 18” or 24” Roof Anchor Galvanized Steel Backer Plate 5/8” Thick. For Mounting 18” or 24” Roof Anchor to Beams or Other Structural Member.
18” Roof Anchor Post
Part Number: ANCHOR18POST
18” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
18” Roof Anchor w/Baseplate
Part Number: ANCHOR18PLATE
18” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
24” Roof Tieback Post
Part Number: ANCHOR24POST
24” Roof Tieback Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
24” Roof Tieback w/Baseplate
Part Number: ANCHOR24PLATE
24” Roof Tieback w/Baseplate Galvanized Finish, 5/8” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
Parapet Anchor
Part Number: A00002
Parapet Anchor. Galvanized Steel. 2.36′′ – 14.17′′ parapet range. Min breaking strength 5000 lbs. Meets or exceeds ANSI Z359.1-2007.
100 ft. Rope Horizontal Lifeline System – 2 Person
Part Number: A300200
Horizontal Life Line System for two (2) workers. Covers a span length of 15 ft. to 100 ft. Breaking Strength of 13,000 lbs. Our kit comes with a double braided polyester rope, diameter 5/8”(16mm). Comes complete with two carabiners, rope tensioner with tool, 6 ft. cross arm straps and a carrying bag.
100 ft. Rope Horizontal Lifeline System – 4 Person
Part Number: A300400
Horizontal Life Line System for four (4) workers. Covers a span length of 15 ft. to 100 ft. Breaking Strength of 14,500 lbs. Our kit comes with a double braided polyester rope, diameter 3/4”(19mm). Comes complete with two carabiners, rope tensioner with tool, 6 ft. cross arm straps and a carrying bag.
Anchor Roof Ridge Double
Part Number: A00152
Roof Ridge Anchor. Galvanized Steel with dual stamped D-rings. Minimum breaking strength is 5000 lbs. Meets or Exceeds ANSI Z359.18-2017, A10.32-2012.
Anchor Roof Ridge Single
Part Number: A00151
Roof Ridge Anchor. Galvanized Steel with single stamped D-ring. Minimum breaking strength is 5000 lbs. Meets or Exceeds ANSI Z359.18-2017, A10.32-2012.
Large Ring Roof Anchor
Part Number: A00153
Galvanized steel roof anchor with stamped single large D-Ring. Min breaking strength 5000 lbs. Meets or Exceeds ANSI Z359.18-2017 & A10.32-2012.
Reusable Roof Anchor
Part Number: A00150
Reusable Roof Anchor. Galvanized Steel with stamped D-ring. Min breaking strength 5000 lbs. Meets or Exceeds ANSI Z359.18-2017.