All Related Products
Concrete (5)
Horizontal Lifeline (8)
Multi-Purpose (6)
Roof (15)
Steel (4)
BeamGuard HLL Stanchion
Part Number: BGSAPOST
The Palmer Safety BeamGuard HLL Stanchion can be used in combination with any of Palmer Safety’s rope HLL kits and cable HLL kits. Able to accommodate up to two workers between each set of stanchions (maximum stanchion spacing is 60’), the BeamGuard has three base size options to allow for installation onto a variety of beam sizes. A Pass-Through Top...
3/4” Reusable Concrete Wedge Anchor 5000 lbs.
Part Number: A345000
Reusable Concrete Anchor 3/4′′ Hole. 5000 lbs. Meets OSHA 1926-502, ANSI Z359.1, ANSI A10.32. This removable concrete anchor has an exclusive “Easy Button” feature that is sure to boost productivity by providing immediate anchor removal and instant user mobility. The anchor can be set as hard as desired without fear of it getting stuck. Can be used in horizontal, vertical...
Anchor Cable Cross Arm – 4 ft.
Part Number: AC48408
1/4” vinyl coated I-beam 4 ft. cable cross-over strap with large ring and small ring for pass-through. Meets or Exceeds ANSI Z359.1-2007.
Anchor Cable Cross Arm – 6 ft.
Part Number: AC72408
1/4” vinyl coated I-beam 6 ft. cable cross-over strap with large ring and small ring for pass-through. Meets or Exceeds ANSI Z359.1-2007.
Anchor Cable With Hook
$0.00
Part Number: N/A
4’ or 6’ X 1/4” vinyl coated cable I-beam crossover strap, ring on one end and locking snap hook on opposite end. Meets or Exceeds ANSI Z359.1-2007.
Anchor Door Jamb
Part Number: A00003
Door Jamb Anchor, Aluminum construction. Min breaking strength 5000 lbs. Meets or exceeds ANSI Z359.1-2007.
Anchor Mega Swivel
Part Number: A5000Mega
5K MEGA Swivel Anchor. Designed for repeated use and is 100% retrievable (Concrete). Meets or Exceeds ANSI Z359.1-2007.
Hot
Anchor Sliding Beamer
Part Number: A3145000
A removable and reusable sliding I-beam anchor, easy to place and remove. This anchor is designed to easily glide along the beam while trailing the worker. Available adjustable from 3”-12” with a minimum flange thickness of .25”.
Anchor Sliding Super Beamer
Part Number: A12305000
Super Sliding Beam Anchor, 12′′ – 30′′ flange adjustable. Min breaking strength 5000 lbs. Meets or exceeds ANSI Z359.1-2007.
Anchor Strap
$0.00
Part Number: N/A
Disposable concrete anchor strap is attached to a structure capable of supporting 5000 lbs. 1-3/4” wide strap (variable lengths available) with a loop on one end, and either a large D-Ring or a loop on the other end, and a full length wear pad. Red strap. Meets or Exceeds ANSI Z359.1-2007 and OSHA.
Anchor Strap
$0.00
Part Number: N/A
Anchor Strap Loop Disposable Concrete Anchor Point Strap is attached to a structure capable of supporting 5000 lbs. 1-3/4" x 4' loop to loop with full length wear pad. Red strap. Various Lengths. Meets or Exceeds ANSI Z359.1-2007.
Beam Anchor
Part Number: A3145001
Beam Anchor, 3′′ – 6′′ flange adjustable. Min breaking strength 5000 lbs. Meets or exceeds ANSI Z359.18-2017 Type A.
Beam Anchor Trolley
Part Number: A00007
I-beam Trolley adjustable 3.54” to 11.41” made of Aluminum and Stainless Steel. Meets or Exceeds ANSI Z359.1-2007.
2-Way Standing Seam Anchor
Part Number: ANCHOR2WAYSEAM
The Palmer Safety 2-Way Standing Seam Anchor is lightweight, reusable, and easy-to-use. This product possesses an all steel construction with galvanized finish making it very durable. Compatible with a variety of standing seam designs.
Beam Anchor Trolley
Part Number: A00008
Beam Anchor Trolley. Min breaking strength 5000 lbs. Meets or Exceeds ANSI Z359.1-2007.
Cross Arm Strap
$0.00
Part Number: N/A
3” wide (variable lengths available) with large D-ring and small D-ring. Meets or Exceeds ANSI Z359.1-2007 and OSHA.
Girder Steel Anchor
Part Number: A00006
Girder Steel Anchor. Min breaking strength 5000 lbs. Meets or exceeds ANSI Z359.1-2007.
12” Roof Anchor Back Plate
Part Number: ANCHOR12BACKER
Back Plate for 12” Roof Anchor 1/2” Thick. For Mounting 12” Roof Anchor to Beams or Other Structural Member.
12” Roof Anchor Post
Part Number: ANCHOR12POST
12” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
12” Roof Anchor w/Baseplate
Part Number: ANCHOR12PLATE
12” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
18” or 24” Roof Anchor Back Plate
Part Number: ANCHOR24BACKER
Back Plate for 18” or 24” Roof Anchor Galvanized Steel Backer Plate 5/8” Thick. For Mounting 18” or 24” Roof Anchor to Beams or Other Structural Member.
18” Roof Anchor Post
Part Number: ANCHOR18POST
18” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.